speaker.xhtml)
To set up the harness cable, proceed as follows:
**1.** Disconnect the harness cable from the speaker.
**2.** From the harness cable, remove the two small metallic connectors.
**3.** Remove the four small internal screws securing the small metal bracket inside the speaker.
**4.** Remove the lower metal mount.
**5.** Remove the four small metal mounting screws securing the larger frame to the bottom of the speaker.
**6.** Remove the two small clips that secure the metal bracket to the lower end of the speaker.
**7.** Carefully pull the bottom of the speaker away from the bottom plate.
**8.** Slide the four screws that hold the bottom plate onto the speaker out of the bottom of the speaker.
**9.** Remove the clip securing the battery.
**10.** Remove the battery connector.
**11.** Rotate the battery connector so the screw holes align, and then screw the connector onto the battery.
**12.** Rotate the small metal bracket so it's facing toward the bottom of the speaker.
**13.** Screw the metal bracket onto the bottom of the speaker.
**14.** Screw the two metal legs of the speaker onto the large metal bracket.
**15.** Rotate the speaker until the bottom plate is facing upward.
**16.** Rotate the speaker so the four screws that secure the battery mounting plate to the bottom of the speaker face outward.
**17.** Screw the battery plate onto the battery terminal.
**18.** Carefully slide the large metal bracket up against the bottom of the speaker.
**19.** Twist the four small screws that hold the bottom plate onto the bottom of the speaker to secure the bottom plate.
**20.** Fit the top of the speaker into the top plate of the frame.
**21.** Secure the top plate onto the top of the speaker with the four screws.
**22.** Wrap the speaker cable through the holes in the top plate and connect the speaker cable to the front of the speaker.
**23.** Slide the speaker back into the front of the radio.
**24.** Connect the speaker cable to the back of the radio.
**25.**
Related links:
Comments